Shrink Equipment

Heat Sealing and Shrink Wrap Machinery
120 Series: Semi-Automatic Shrink Packaging Systems

Clamco's L-sealer/tunnel combination system includes such standard features as unitized package tray and film cradle with pinwheel perforator, the largest shrink tunnel in its class, and 11-gauge steel construction throughout.

The resulting high throughput and superior strength are further enhanced by this system's efficient 120-volt operation. In addition, its comparatively lower price makes the 120 Series the best value in its category.

The 120 Series semi-automatic shrink packaging system includes many standard features and unique advantages not found on competitive systems. Its low cost and 120-volt efficiency make it ideal for today's quick print and similar-sized operations.

Applications:

 •Designed to seal and shrink most polyolefin and PVC films.

Standard Features:

 •Unitized sealer/tunnel combination with console stand

 •Microprocessor-controlled heat cycle with automatic temperature compensation

 •2100 watt tunnel heating power; 360-degree air circulation

 •Height-adjustable, heavy-duty seal head with stainless steel film clamps

 •Unitized, adjustable package tray and film cradle with pinwheel perforator and variable brake

 •Magnetic hold-down featuring adjustable, single large magnet

 •Film burn-off control

 •Variable-speed Teflon® coated mesh belt-tunnel conveyor

 •Made in USA

Optional Features:

 •Power take-away conveyor (variable distance, adjustable height)

 •Locking casters

 •Scrap take-up wheel

 •220/208V single phase power

 •Auto cool down timer for tunnel

 •Cycle counter

Specifications:

 •Seal area 16"W x 20"L (41cm x 51cm)

 •Tunnel chamber 16"W x 20"W x 8"H (41cm x 51cm x 20cm)

 •Overall dimensions 24"W x 91"L x 52"H (61cm x 229cm 119cm)

 •11-gauge steel construction throughout

 •120V, 20 Amp operation (export voltages available)

^ Back to TOP ^

770 Series: Semi-Automatic L-Sealers

The 770 Series L Sealers offer an outstanding package of standard features and are available in a wide variety of seal area sizes and option packages for effective selection of the best shrink packaging machinery for the job intended. With the 770 Series you can truly achieve maximum cost effectiveness in the purchase of your shrink packaging system.

Standard Features:

 •Microprocessor controlled heat cycle with temperature compensation

 •Film burn off control

 •Height adjustable seal head with film clamps

 •Adjustable package tray

 •Adjustable seal pads

 •Pin wheel perforator or impulse hole punch

 •Designed to seal most polyolefin, polyethylene, and PVC shrink films

 •Seal area sizes from 15" x 15" up to 30" x 48"

 •Unitized film separator tray and film cradle with adjustable brake

 •One year limited warranty

 •Operates on 120V up to 30" x 36" sealing area, larger operate on 220V, single phase

Optional Features:

 •Heavy duty console stand with casters and levelers

 •Magnetic hold down, featuring two (or more) adjustable magnets

 •Power take away conveyor

 •Scrap take up wheel

 •Electrical hole punch

Other Features:

 •Intermediate production level machinery

 •Heavy gauge steel construction

 •Made in USA

 •Export wiring available

 •Specifications and design features subject to change

^ Back to TOP ^

850 Series: Heat Shrink Tunnels

Unique recirculating bottom air flow heat transfer system envelops the products with hot air quickly and efficiently providing optimum shrink wrapping at the lowest possible cost. An exceptional value, each tunnel in the 850 series offers such standard features as high efficiency finned rod heating elements, a fully insulated heat chamber, heavy duty conveyor, and height adjustable consoles that include casters and levelers.

 

Standard Features:

All 850 Series Heat Shrink Tunnels

 •Fully insulated heat chamber

 •Variable speed conveyor

 •Digital precision temperature control

 •Automatic cool down

 •High efficiency finned rod heating elements

 •Bottom air flow heat transfer system

 •USDA approved

850 Heat Shrink Tunnel

 •Chamber opening - 15"W x 28"L x 8"H (38cm x 71cm x 20cm)

 •Variable speed 48"L Teflon mesh belt conveyor (0 to 70 FPM)

 •220V, single phase, 29 amp

 •6000 watts of heating power

 •Overall dimensions 48"L x 22"W (122cm x 56cm)

 •Approximate shipping weight - 225 lbs. (102kgs.)

851 Heat Shrink Tunnel

 •Chamber opening - 15"W x 28"L x 8"H (38cm x 71cm x 20cm)

 •Variable speed 48"L quick adjusting live/dead roller conveyor (0 to 70 FPM)

 •220V, single phase, 29 amp

 •6000 watts of heating power

 •Overall dimensions 48"L x 22"W (122cm x 56cm)

 •Approximate shipping weight - 255 lbs. (116kgs.)

852 Heat Shrink Tunnel

 •Chamber opening - 21"W x 28"L x 10"H (53cm x 71cm x 25cm)

 •Variable speed 48"L quick adjusting live/dead roller conveyor (0 to 70 FPM)

 •220V, single phase, 29 amp

 •6000 watts of heating power

 •Adjustable console stand (32" to 36" from the floor) with casters and levelers

 •Overall dimensions 48"L x 28"W x 53" - 57"H (122cm x 71cm x 135cm - 145cm)

 •Approximate shipping weight - 400 lbs. (181kgs.)

Optional Features:

 •1.5" and 1" Roller spacing (851 and 852 only)

 •Teflon mesh belt overlay for 851 and 852

 •Console stand with casters and levelers for 850 and 851

 •Directional air controls

^ Back to TOP ^

6022 Series: Heat Shrink Tunnels

NEW 6022 IS BUILT FOR PERFORMANCE, FLEXIBILITY AND VALUE!

The Clamco 6022 offers great performance in a smaller-size chamber design for medium and intermediate applications. Features include 9,000 watts of heating power, 3/4 horsepower blower, and much more.

The diverse 6022 is ideal for use with automatic and semi-automatic sealers - and it's value priced for excellent sealer-tunnel combo affordability.

Standard Features:

 •Chamber opening 22"W x 34"L x 10"H

 •9,000 watts of heating power

 •Variable-speed, live/dead roller conveyor

 •Air-cooled controls

 •Fully insulated heat chamber

 •Precision digital temperature control

 •Automatic cool down

 •360° air flow heat-transfer system with 3/4 HP blower

 •Double entry and exit curtains for great efficiency

 •Adjustable levelers

 •USDA approved

 •Made in U.S.A.

 •One-year limited warranty

Specifications:

 •230V, single phase, 48 amps

 •Overall dimensions: 60"L x 38"W x 63"H

Options:

 •1" roller spacing

 •Casters

 •Integrated controls with 6700 Series Automatic L-Sealers

 •Mesh belt conveyor

^ Back to TOP ^

The 220 Special: Shrink Packaging Systems

The Clamco 220 SPECIAL is a unitized shrink packaging system designed to meet heavy duty production line needs. It incorporates the labor saving features of magnetic pressure hold, temperature compensation and power take away conveyor in the sealer with a high efficiency 6000 watt shrink tunnel, to yield packaging production speeds of up to 15 packages per minute. Film clamps and a heavy duty film cradle are also included as is Clamco's unique impulse hot hole burner. The system is further enhanced with a hand crank height adjustable tunnel conveyor to provide smooth transfer from the sealer at various take away conveyor heights.

Standard Features:

Sealer

 •Heavy duty seal arm construction

 •15" x 20" Sealing area

 •Timer controlled impulse sealing

 •Heavy duty adjustable sealing pads

 •Magnetic pressure hold

 •Power take away conveyor

 •Element temperature compensation

 •Impulse hot hole burner

 •Film clamps

 •Heavy duty film cradle

Tunnel

 •6,000 watt with fully insulated heat chamber

 •Uniform adjustable, variable speed conveyor

 •Teflon coated fiberglass mesh conveyor belt

 •High efficiency finned rod heating elements

Stand

 •Heavy duty construction

 •Hand crank tunnel conveyor elevator

 •Heavy duty castors

Specifications:

 •Impulse seal type

 •Seal area 15"L x 20"W

 •115VAC, 10 amp electrical requirement for sealer

 •220VAC, 29 amp electrical requirement for tunnel

 •Chamber opening size 15"W x 8"H

 •Overall dimensions 112"L x 25"W x 53"H

 •Production speed up to 15 PPM

^ Back to TOP ^

5000 Series: Semi-Automatic L-Sealers

The 5000 Series L Sealers are heavy-duty production console sealers which have a powered automatic package take-away conveyor. With the automatic take-away conveyor, the operator can produce up to fifty percent more packages in any production period. There are two types of sealers in the 5000 Series; an air operated unit and an electromagnetic unit. With the air operated unit, the arm is actuated by an air cylinder. The operator, after inserting a package in the film and moving the package to the seal area, pushes two buttons on the front of the machine starting the sealing cycle. While the next package is being inserted by the operator, the sealing arm automatically seals the package, returns to the up position, and the package is automatically conveyed to the shrink tunnel. The electromagnetic unit operates in the same sequence except that the arm is brought into the sealing position manually by the operator. This actuates the magnetic hold-down and initiates the automatic cycle to complete the package and move it automatically to the shrink tunnel.

Electronically timed 0 to 5 seconds pressure dwell control is standard. This is a requirement when sealing polyolefin films. The 0 setting permits the sealing of PVC and polyethylene films.

Solid state electronic controller with an internal adjustable heat compensator provides positive sealing element temperature with every cycle.

Optional film inverting head and power unwind system permits the inline feeding of the product, for easy transfer of package into the seal area.

Standard Features:

 •Air operated sealing arm with safety system

 •Electromagnetic held sealing arm

 •Positive sealing element temperature control

 •Dwell control

 •Adjustable sealing pads

 •Power take-away conveyor

 •Heavy-duty construction

Specifications:

 •Electrical Requirements:

 •220 volt, single phase, 3 wire, 10-15 amp

 •Air Requirements:

 •5 CFM at 65 psi

Accessories:

 •Film inverting head with power unwind

 •Conveyor - sealer to tunnel

 •Hot hole punch

 •Electrical hole punch

 •Pneumatic die punch

 •Vacuum scrap removal (less container)

^ Back to TOP ^

6700 Series: Automatic L-Sealers

NEW 6700 DELIVERS THE FEATURES AND PERFORMANCE TODAY'S OPERATIONS DEMAND!

The Clamco 6700 has the advantages you need - enhanced Allen-Bradley microprocessor PLC, touch-screen interface and I/O diagnostics, memory for up to 20 package sizes, PLC and interface tunnel controls, self-adjusting scrap take-up wheel, microperforators for uniform air evacuation - and much more. All resulting in an automatic L-bar sealer with outstanding speed, throughput and performance to maximize productivity and profits.

Standard Features:

 •Allen-Bradley microprocessor or base controller (PLC)

 •Touch-screen interface with diagnostics

 •Product memory for up to 20 package configurations

 •Heavy-duty hot knife sealing system with 18" x 23" seal area

 •Lower film cradle with film splitter and static eliminator

 •Adjustable height sealing jaws for products up to 8" high

 •Product alignment guides

 •Horizontal and vertical product sensors

 •Variable speed conveyors - 15 to 100 fpm

 •Package speed up to 40 per minute (depending on package size and film type)

 •Self-adjusting scrap take-up reel

 •Micro-Perf perforators for uniform air evacuation

 •Variable-speed film unwind

 •23" maximum film width

 •Casters and levelers

 •Made in U.S.A.

 •One year limited warranty

Specifications:

 •110V, 1 cfm, 80 psi, 120V, 15 amps

 •Overall dimensions: 69"L x 50"W x 51"H

 •Options:

 •Various seal knife options available

 •Tunnel controls integrated through PLC and interface (7221 and 6022 Tunnels)

 •Closing conveyor

 •Printed film registration

 •Split conveyor for product staging

 •Light package takeaway

 •And many more

^ Back to TOP ^

7220 Series: Heat Shrink Tunnels

Clamco's 7220 Series is the choice for tough, dependable long-life performance in continuous production environments.

Constructed of heavy-gauge structural steel, Model 7221 features a heavy-duty blower, variable air velocity control, digital heat control, and a variable-speed roller conveyor that instantly adjusts between live and dead.

The Model 7221 production shrink tunnel combines advanced design precision with tough, time-proven features - expertly crafted by Clamco, the industry's respected name for steadfast reliability and value.

Standard Features:

 •Digitally controlled heat to 450°F (232° C)

 •Variable air velocity control

 •Separate shrink chamber and conveyor

 •Fully insulated heat chamber

 •Air-cooled controls

 •Double entry and exit curtains for greater efficiency, and minimum heat loss

 •Adjustable heat pattern

 •Sturdy steel base

 •Live/dead roller conveyor

 •Made in USA

Optional Features:

 •Additional roller - 1.5" or 1" roller spacing

 •Fiberglass mesh or stainless steel mesh conveyor

 •Stainless-steel construction

 •Spare parts kit

Specifications:

 •Shrink chamber area 22"W x 10"H (56cm x 25cm)

 •Silicone-covered roller conveyor

 •Conveyor speed 0-125 fpm

 •Conveyor dimensions 20"W x 71"L x (maximum) 67"H (89cm x 180cm x (maximum) 170cm)

 •Electrical requirements 230V, 48A, 3Ph

 •Heater bank 14,500 Watts

^ Back to TOP ^

1700 Series: Horizontal Form/Fill/Seal Wrappers

The low-cost, high-speed shrink wrap alternative! Clamco's patented shrink film wrapping 1700 System features a rotary hot knife side seal attachment, production speeds up to 80 packages per minute, a maximum seal width of 17 inches, easy touch screen operation and much more. Combined with our rugged 860 Heat Shrink Tunnel, this systems gives you high speeds at less cost.

Standard Features:

 •Patented shrink film wrapping machine

 •Patented rotary hot knife side seal machine

 •PLC controls

 •Touch screen operator interface for all machine controls

 •Variable speed infeed systems

 •Variable speed, Venturi vacuum belt

 •Variable speed cast steel seal knife seals most polyolefin and PVC films

 •Pin perforator system

 •Obstruction detectors on end seal system

 •Fully closed end seal system with E-stop

 •Quickly adjustable seal centering system

 •One year limited warranty

 •Standard Controls on Touch Screen:

 •All product set-up features (i.e. - product length, speed, etc.)

 •Fault troubleshooting ability

 •Hot knife temperature set point and independent feedback

 •Infeed, vacuum belt, and end seal motor speeds, counter

 •Standard Features on Model 17-80S Wrapper:

 •All of the above standard features, plus:

 •17" wide by 6" high end seal knife system

 •Up to 80 cycles per minute

 •Patented continuous motion, rotary hot knife system that seals most polyolefin films

 •Eight foot infeed conveyor

 •Crank adjustable inverting head

 •Crank adjustable side seal for quick product changeover

 •Scrap film take up wheel

Optional Features:

 •PVC seal system

 •Automatic product feed systems

 •Machine casters

 •Vacuum scrap removal system

 •Stainless construction

Specifications:

 •Maximum package length 23" (58cm)

 •Maximum film speed 90 FPM

 •Maximum film width 36" Flat film, 21" Centerfold film

 •220V, single phase, 20 amp

 •Overall dimensions 147"L x 49"W

^ Back to TOP ^

860 Series: Heat Shrink Tunnels

 

 

 

 

Standard Features:

 •All 860 Heat Shrink Tunnels

 •Chamber opening - 15"W x 60"L x 8"H (38cm x 152cm x 20cm)

 •13,500 watts of heating power

 •220V, three phase

 •Variable speed conveyor

 •Fully insulated heat chamber

 •Control panel on the outside of the heat chamber for longer component lifespan

 •Digital precision temperature control

 •Automatic cool down

 •Air direction controls

 •Variable air velocity control

 •High efficiency finned rod heating elements

 •Bottom air flow heat transfer system

 •Adjustable levelers

 •One year limited warranty

 •860 Heat Shrink Tunnel

 •Variable speed 84"L, quick adjusting, live/dead roller conveyor

 •860MB Heat Shrink Tunnel

 •Variable speed 84"L Teflon coated fiberglass mesh conveyor

Optional Features:

 •1.5" or 1" roller spacing (853 only)

 •Locking casters

 •Other Features:

 •Heavy gauge steel construction

 •Made in USA

^ Back to TOP ^

7000 Series: Semi-Automatic Sleeve Wrappers

CLAMCO 7000 Series semi-automatic sleeve wrapper provides an economical means of packaging a product or a cluster of products in an open-ended envelope of shrink film. Benefits include reduction of packing costs, product identification, increased packing speed, reduced pilferage and reduced packing material storage. The operator feeds the product into the curtain of film by hand, then actuates two push buttons starting the sealing cycle. Pneumatically operated jaw lowers, sealing and cutting the film. As the jaw returns, the automatic discharge conveyor removes the package. The operator then repeats the operation. The start buttons will ensure that hands are well clear of the closing seal bar. In addition, a pressure switch is also included which will cause the bar to reverse its motion if obstructed. The impulse heating system provides heat only when the bar is closed.

Specifications:

 •Electrical Requirements:

 •230/volt 15 amp single phase

Air Requirements:

 •4 CFM at 65 psi

 •Shipping Weight:

 •Approx. 500 lbs.

^ Back to TOP ^

854 Series: Heat Shrink Tunnels


 

 

 

Standard Features:

 •All 854 Heat Shrink Tunnels

 •Chamber opening - 31"W x 44"L x 17"H (79cm x 112cm x 43cm)

 •12,000 watts of heating power

 •220V, three phase

 •Variable speed conveyor

 •Fully insulated heat chamber

 •Control panel on the outside of the heat chamber for longer component lifespan

 •Digital precision temperature control

 •Automatic cool down

 •Air direction controls

 •Variable air velocity control

 •High efficiency finned rod heating elements

 •Bottom air flow heat transfer system

 •Adjustable levelers

 •One year limited warranty

 •854 Heat Shrink Tunnel

 •Variable speed 68"L, quick adjusting, live/dead roller conveyor

 •854MB Heat Shrink Tunnel

 •Variable speed 68"L Teflon coated fiberglass mesh conveyor

Optional Features:

 •1.5" or 1" roller spacing (854 only)

 •Locking casters

 •Other Features:

 •Heavy gauge steel construction

 •Made in USA

^ Back to TOP ^

C Series: Semi-Automatic Heavy-Duty Sleeve Wrappers

Clamco's new semi-automatic C Series Sleeve Wrappers are heavy-duty workhorses designed to easily handle thicker materials. Quality-built in North America for dependable performance, they feature dead plate infeed tables, dual push-button controls, air-operated sealing head, automatic motorized product discharge conveyor and more. Maximum operating speeds are six to eight packages per minute. The C Series offers it all in a choice of seal area sizes.

Standard Features:

 •Easy-load film loading system

 •Independent upper and lower adjustable speed motorized film unwind systems

 •Dead plate infeed tables

 •Dual push-button controls

 •Linear bearing-mounted air-operated upper and lower seal heads (Teflon© coated)

 •Electronic time-proportional controller for seal temperature

 •Automatic motorized product discharge conveyor

 •Heavy-duty welded structural steel tube construction

 •Epoxy paint finish

 •Heavy-duty casters

Specifications:

 •220V, 1PH, 16A

 •75 psi / 1.5 cfm compressed air required

Options:

 •Clamco Heat Shrink Tunnel (Model 7221 or 854 recommended)

 

Models
Number
Seal Area Max.
Film
Width
Unit Dimensions Weight
C24 12"H x 24"W 22" 78 1/2"H x 42"W x 52"L 450 lbs
C34 16"H x 32"W 32" 78 1/2"H x 52"W x 52"L 550 lbs
C44 16"H x 42"W 42" 78 1/2"H x 62"W x 52"L 650 lbs
C54 16"H x 52"W 52" 72"H x 74"W x 80"L 850 lbs

^ Back to TOP ^

 

Copyright © Chem Stretch Inc.  All Rights Reserved.

Website Design by
Dramatic Visions LLC

Web design by Dramatic Visions, Baltimore Maryland

 

Chem Stretch Customer Service

340 Bynum Road

Forest Hill, MD 21050

PHONE: 410-420-7033

FAX: 410-420-7044